1 / 3
coathanger
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Coat hanger that prints easy and looks cool
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 8
- Makes
- 0
- Views
- 51
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bedroom
- License
- Creative Commons — Attribution
the settings in the slicer project are the ones in the picture.
if you want to configure it your self:
- print the inside with no top and bottom layers and low infill.
- the linewidth of the inner infill should be increased to about 0.8mm. This still prints fine with a 0.4mm nozzle