1 / 1
SSD Spacer for Icy-Dock EZ-Fit Lite MB290SP-B — image 1

SSD Spacer for Icy-Dock EZ-Fit Lite MB290SP-B

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A simple spacer to increase SSD thickness for a secure fit in Icy-Dock EZ-Fit Lite MB290SP-B drive trays

Rating
0 / 5
Likes
0
Downloads
7
Makes
0
Views
34
Reviews
0

Updated at source:

Model information

Category
Computers
License
Creative Commons — Attribution

This is a simple but effective 3mm thick spacer designed to increase the thickness of standard 2.5" SSDs so they fit more securely in Icy-Dock EZ-Fit Lite MB290SP-B drive trays.

Problem it solves:

The Icy-Dock MB290SP-B tray is designed for thicker 2.5" drives (typically 9.5mm HDDs), and thin SSDs (usually 7mm) can rattle or not mount properly. This 3mm spacer fills the gap perfectly, adding the needed thickness for a secure, snug fit.

Customization:

- The spacer is 3mm thick as designed

- Can be easily scaled in your slicer if you need a different thickness

- A STEP file is included in the download for those who want to modify the design in CAD software to suit their specific needs

Print Settings:

- No supports needed

- Standard 0.2mm layer height works great

- 15-20% infill is sufficient

- PLA, PETG, or ABS all work fine

- Print time: approximately 15-30 minutes depending on printer

Assembly:

Simply place the spacer on either the top or bottom of your SSD before mounting it in the Icy-Dock tray. The spacer will sit between the SSD and the tray. For extra security, you can optionally use double-sided tape to attach it to the SSD, though this is usually not necessary as the tray will hold everything in place once mounted.

Notes:

- Designed specifically for the Icy-Dock EZ-Fit Lite MB290SP-B

- May work with other similar 2.5" drive trays that have the same thickness requirements

- The spacer matches the footprint of a standard 2.5" drive

- No adhesive required, but double-sided tape can be used if preferred

Tags