HP EliteDesk 800 G4/G5 SFF 2230 NVMe standoff
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Small piece to hold in place a 2230 NVMe drive using the standard empty holes of the motherboard. Tested on G4 and G5
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 24
- Makes
- 0
- Views
- 527
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution
Very simple model, but also very useful, at least for me. With everything with flash memory in low supply and crazy prices these days, the only cheap NVMe drives I found were 2230. I knew the motherboard of both the HP EliteDesk 800 G4 and the G5 in their SFF variants had the holes, but I didn't know a propietary HP mounting kit is "required" because standoffs are not included. This piece replaces that, you just need an M2x4 screw (or longer, apparently the hole goes all the way through the motherboard's PCB but ideally I'd use M2x5 screws).
OpenSCAD source code included in case you want to make any modifications.
