Non-Slip Apple TV Remote Case - Perfect Fit - Access to Siri Button and Charging Port & ~30-45min
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Grips to Fabric, Couches, Blankets - Fits Latest Generation Siri Remote - Durable - Snap Fit - Fast
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 50
- Makes
- 0
- Views
- 209
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Living Room
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
For a faster print I recommend using the Infill Hack by setting the top and bottom layers to zero, gyroid infill 25%. For best fit and durability use PETG filament.
Print Specifications
Specification | Value |
Estimated Print Time | 49 Minutes |
Filament Used | 11.9 g |
Layer Height | 0.20 mm |
Wall Thickness | 1 perimeters |
Infill Density | 30% |
Infill Pattern | Gyroid |
Top Layer | 0 |
Bottom Layer | 0 |
Supports Required | No |
Adaptive Layer Height | Disabled |
Settings Used
This Print: 0.40mm nozzle • 245°C Nozzle • 80°C Bed
Print Notes
Optimized for Ender 3 V2 with BLTouch bed leveling
Uses off-print purge line to prevent nozzle blobs
Exported from PrusaSlicer
⚠ Adjust temperatures +/-5C if experiencing adhesion or stringing issues