Lid clip for Emsa Clip and Close
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement clip for broken lids that keeps the box leak proof.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 30
- Makes
- 0
- Views
- 106
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution
This part fits the quadratic 1.75L box, for others you may need to scale it on the longitudinal axis.
Remove all of the remaining plastic of the broken off clip with a cutter or else it will not fit.
Print setup suggestion
PETG (The PLA print failed after two months of usage. PETG is still in testing 😉)
.4 Nozzle
.2 STRUCTURAL profile
.3 Layer height, the wall thickness is optimized for this.
2 Perimeters
0% Infill
Flow multiplier: Better overextrude a bit than underextrude
Place the seam somewhere at the handle. The upper left corner is the most stressed part.
Unasked advice
Buy boxes with removable seals. If you are not careful, black mould will develop on the Emsa lid seal sooner or later and then you have to throw it away. Other brands that have a removable seal are also not resistant to this, but I managed to take them apart and clean them multiple times with no black residue left.
German summary, also for search engines
Dies ist ein Ersatzteil für Emsa Clip and Close Frischhaltedosen bei denen der Verschluss vom Deckel abgebrochen ist.