Bulkhead Attachment Collet for 16 mm Tube
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Collet mount for attaching 16 mm outer diameter tubes to bulkheads.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 4
- Makes
- 0
- Views
- 57
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution
A collet mount for attaching 16 mm outer diameter tubes to bulkheads. Useful for attaching tail booms to fuselages, or any other mounting use case for a 16 mm tube. Two collet backers are provided: one which can be glued (or unioned in CAD) to any flat surface, and one which has a keyed outer perimeter and a nut to allow it to be mounted through a bulkhead with a corresponding hole shape. A drawing of the outer perimeter dimensions is provided below.

Printing Recommendations
Print with high infill and 3-4 perimeters for strength. Print in the orientations provided in the files and shown in this photo:
