Bulkhead Attachment Collet for 16 mm Tube
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Collet mount for attaching 16 mm outer diameter tubes to bulkheads.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 58
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
A collet mount for attaching 16 mm outer diameter tubes to bulkheads. Useful for attaching tail booms to fuselages, or any other mounting use case for a 16 mm tube. Two collet backers are provided: one which can be glued (or unioned in CAD) to any flat surface, and one which has a keyed outer perimeter and a nut to allow it to be mounted through a bulkhead with a corresponding hole shape. A drawing of the outer perimeter dimensions is provided below.

Printing Recommendations
Print with high infill and 3-4 perimeters for strength. Print in the orientations provided in the files and shown in this photo:
