Coupler for Ikea Bergshult shelves
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
in-line coupler to connect IKEA Bergshult shelves end-to-end neatly
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 5
- Makes
- 0
- Views
- 40
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Share Alike
This coupler will let you connect IKEA Bergshult shelves end-to-end without any gaps or end-grain showing. It's 20mm wide and has a 5mm central bar and it reflects the edge-trim of the shelf so as to be as unobtrusive as possible.
You might be able to print it on a 45 degree angle standing up to reduce the amount of support material needed but I found I got poor print quality trying to do that and got better results just laying it flat on the bed an using as much support material as is needed. I printed in ASA because the shelf is going to be in direct sunlight and I didn't want it getting yellowed or brittle but if your shelves are in the shade then any of the standard materials should work fine.
1-6-2026 Added option for 300mm deep shelves