Anet A8 Small Front Brace
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
There are many front frame braces over thingiverse, but all of them are attached to the laterar thread rods. I have my…
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 22
- Makes
- 0
- Views
- 187
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
There are many front frame braces over thingiverse, but all of them are attached to the laterar thread rods. I have my Anet anchored to a base, so I didn't need a large front frame because I could anchor the frame to the base too whit a couple of screws, so I design this model.
The screw holes are made for 3mm wide screws. The length of them depend of the thickness of your base.
Print Settings
Printer:
Anet A8
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
25%
Notes:
I printed mine at 0.15mm layer height, but at 0.2mm will be just OK as well.
Category: 3D Printer Parts