1 / 1
GameClip for encased Samsung Galaxy S6 — image 1

GameClip for encased Samsung Galaxy S6

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

holds a Samsung Galaxy S6 with a thin TPU-case (72mm wide, 8mm thick)

Rating
0 / 5
Likes
0
Downloads
10
Makes
0
Views
249
Reviews
0

Updated at source:

Model information

License
GNU General Public License v2.0

This is a model based on bernabap's GameClip: https://www.thingiverse.com/thing:43977

It holds a Samsung Galaxy S6 with a thin TPU-case (72mm wide, 8mm thick) to the PS3 controller (Dualshock 3). I placed the phone over the controller for a better center of gravity so it takes less effort to hold.

Expert Cura users only: I also included two volumes for more detailed infill and excluding support. For this you need the per-model-settings and mesh features in Cura v3.1.0+. You can use them to remove all supports where you most certainly don't need them (anti overhang mesh) and increase the infill at the weak spot around the Home Button (infill mesh; I recommend overall infill of ~25% with 2 walls and 90% infill for the infill mesh). Just merge the objects when you applied all settings.

This is licensed under the GNU GPL v2. There is no warranty.

Category: Mobile Phone

Tags