1 / 2
Shure MV6 Pole Mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
The mic is angled up at 25deg from the pole. The mount is designed for poles with a diameter of ~35mm. You should print in something less stiff than PLA (i.e. PETG or ASA) if you've got to "snap" the opening around a pole and can't guide it over the top.
BOM:
2x M3 square nuts (~1.6mm deep)
2x M3 bolts 20mm (minimum)