INBXX - Corner Socket for Core One+ Crushed Legs
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Sockets to be installed on the top corners of INBXX in order to place a CoreOne with Crushed Legs on top of INBXX.
- Rating
- 5 / 5
- Likes
- 47
- Downloads
- 119
- Makes
- 8
- Views
- 973
- Reviews
- 8
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
For the storage of the print sheets I upgraded my CoreOne+ with "Crushed legs with expandable support for multiple steel sheets for Core One".
I did not like the idea of it just sitting on top of INBXX, so I designed the corner plates with slight indent for the squasmballs and additional optional guiding pins to avoid accidental moving of the CoreOne.
There are separate sockets for front and back corners. The fron ones have two holes for attaching the Pins to avoid collision with the sheet holders. The back ones only have one hole since there is no risk of collision.
The Pins are optional and require a M3 thread insert.
Update 2026-03-21 on mounting screws:
For attaching the pin to the Sockets a M3 8mm was used.
The sockets are attached with two M3 18mm screws.
Both shown in the pictures.
Update 2026-06-10: added section of user communicated compatibility to other C1 feet.
I used PETG
Sockets are printed up-side-down with 15% infill and no supports.
Pins werde printed with 60% infill for sufficient material for thread
I used
with this version of the Steel Sheet Holder
with the exchanged Longer push rod
User communicated compatible C1 feet
https://www.printables.com/make/3446108/3467420