1 / 1
Ikea Friheten couch raiser (9 height options: 20-50mm) — image 1

Ikea Friheten couch raiser (9 height options: 20-50mm)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Extensions for rising an ikea Friheten couch to a more comfortable height or to allow robot vacuums to clean under.

Rating
0 / 5
Likes
5
Downloads
31
Makes
0
Views
186
Reviews
0

Updated at source:

Model information

Category
Living Room
License
Creative Commons — Attribution — Share Alike

Introduction

Ever since getting the Ikea Friheten corner couch I was bothered by the fact that my robot vacuum was unable to reach under the couch. Also standing up from a "low" couch is getting harder with age. So I decided to design risers and test them to ensure stability over a longer time.

I've now tested these risers for two years and I am satisfied with the stability. My house has hydronic floor heating (max temperature 35 °C) and the PLA has not warped. I'm 1.82 m and use the 42.5 mm riser.

Warning, based on feedback: I appears Ikea has multiple molds for the legs with different hexagonal openings. This is sized to have 15.588 mm between opposite flat edges and a height of 11.5 mm. On my 2022 Frihetten couch this means it has sufficient play.

Required parts

  • Ikea Friheten couch

  • 3D printed parts

    • 7 risers

    • 4 wheel risers

  • 8 screws of diameter 4 mm or 4.5 mm and a length of [20 mm + riser height] (choose a longer length if you cannot find the exact length).

  • Optionally: anti slip pads.

Printing parameters

  • The parts are designed to print without supports using standard settings.

  • No particular layer recommendations.

  • The files are already oriented for printing.

  • I recommend a high infill of at least 70%, I went 90% rectilinear.

  • Optionally you could use fuzzy skin (on the visible ones I used 0.15 and 0.15 for thickness and point distance at 0.25 mm layer height).

  • Recommended filament is either matte PLA or matte PETG.

Tags