K1C Unibody Riser Timelapse Remote Holder & Trigger
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Take timelapse with your smartphone on the K1C, using a simple Bluetooth remote holder and "trigger stick".
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 9
- Makes
- 0
- Views
- 145
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
No rooted firmware for K1C 2025 at time of writing. No custom webcam, no Octolapse. 😡
This is a set of simple Bluetooth remote holder and "trigger stick".
Do timelapse with your smartphone by using the print head to trigger the remote on every layer.
Feel free to remix on my Tinkercad.
PARTS REQUIRED
These are my AliExpress affiliate links. They don't cost more, but I do make a small commission - That will help offset the costs of my future projects. 👍
Optional - Rechargeable CR2032 Battery | CR2032 Charger
HOW TO BUILD
Stick holder into top-right corner with VHB.
Attach "trigger stick" onto right side of print head using 2 X M3*10 screws.
HOW TO TIMELAPSE
Pair Bluetooth remote with your smartphone.
Place controller into holder.
Position your smartphone camera. Highly recommended to use manual exposure/exposure lock.
Insert GCode in GCODE-TIMELAPSE.txt into the timelapse section in your slicer (may need some time/position fine tuning).
Remember to turn on timelapse before printing.