Kywoo Tycoon – SKR Mini E3 Replacement Electronics Cover (1-Piece or 2-Piece, Optional 4010 Fan)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
When upgrading the machine with an SKR Mini E3, the original electronics cover no longer fits. I recreated the cover to restore a look closer to the machine’s original appearance.
The files provided allow you to print the cover either as a single piece or split into two parts for easier printing. If you choose the two-part version, it is designed to be cut at 220 mm in your slicer. Assembly tabs were added in the slicer, as shown in the reference image, to ensure proper alignment and bonding.
Versions are included with or without a 4010 fan mount.
Separator and washer files are also included for proper power supply installation and spacing.
Please note that, because this cover is thicker than the original metal one, longer screws may be required in some installations.
I recommend using PETG with 4 walls for the cover and PETG also for the separators and washers.