Jumper-Wire-Organizer for Kistenberg NOR 12
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Custom insert for the Kistenberg NOR 12 organizer to store Dupont jumper wires neatly and prevent tangling.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 21
- Makes
- 0
- Views
- 155
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial
This is a custom 3D-printed insert designed to keep cables organized and to prevent tangling.
Print as many as you need. I‘d recommend printing at least 4 inserts per row in order to suit the most common DuPont-cable lengths.
Compatible with:
Kistenberg NOR 12 (290 × 195 × 35 mm)
same models from other brands may also work! (but not tested yet)
Link to the Box: https://www.kistenberg.com/en/organisers/tool-organisers/nor-nor-duo/nor-organiser-12-kno30204
Print Settings
Material: PLA/PETG/ASA/…
Layer height: 0.2 mm
Infill: 15–20 %
Perimeters: 2–3
No supports required (print in the provided orientation)
Printing Tip
Due to different printer-tolerances, it is recommended to print only one insert at first and then - if needed - resize the following inserts in your slicer by some percents to make the fit more tight or loose. The fit should rather be tight, to prevent the inserts from easily falling out of the slots.
*NOTE: the pictures may slightly differ from the actual model due to ongoing optimization