2.2" Buggy Rear Slick Tire Mold
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Use this mold to cast your own racing slicks for your 1/10 buggy.
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 99
- Makes
- 0
- Views
- 539
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Public Domain
Tire Casting Tutorial/Full Process:
Print Settings
Material: PLA
Infill: 30%
Top/Side Walls: 3 minimum
Supports Required
Resin Requirements
Mold Internal Volume: 39,974 mm3
Suggested Resin Batch: 60g + 1g Carbon Black
Suggested Resin: VytaFlex 20
Carbon Black: https://justpigments.com/products/carbon-black
Mold Release: Stoner E236
Resin Pigment (alternative to carbon black): Alumilite
Required Hardware
O-Ring Specs:
ACE Hardware, Midwest Fastener 78221
1-5/8" ID
1-7/8" OD
1/8" Thick
18mm Flat Washer
ACE Hardware, Midwest Fastener 51642
M5x12mm Bolt
ACE Hardware, Midwest Fastener 72482
M5x65mm Bolt
Sourced from Amazon
M5 nut
Sourced from Amazon