Counting matching models…
This actually ended up really useful, if grass seed wasn't so expensive I'd be using it all the time because it really works well! Long story short, I needed to spread some grass seed so I designed and 3D printed one (well mostly printed,…
This is a small mold for a ceramic cup that I designed and fabricated. The mold is made from plaster, which allows you to cast ceramic slip inside to create the final cup. A crucial step in the process is preparing the 3D-printed master…
Hello everybody this is my mold for silicone to make resin boomarks. Just mix silicone my favorite is the blue one. Pour in the mold wait few hours and remove it. And you can use them to make pretty resin or other material bookmarks Specs…
This is a 2-part 3D printable mold designed to create objects using silicone, resin, wax, or similar casting materials. The mold features a clean internal cavity with fine details to achieve a realistic The two-piece design allows for…
Supports Unfortunately, since this model has an internal dome shape, it requires supports. i recommend using painted ones to make sure you only support needed areas and to ensure a good surface finish. Materials 80a rubber resin and…
01/03/2026 Update: I modified the mold at the base of the floor drain (trainer recess). When I first created this vessel sink, I machined this part by hand (which was quite a delicate process, I must say). I took the measurements based on…
Designed it as a wedding gift. It is designed to pour concrete into it, but it should work with other casting materials as well, as long as they are not too low viscosity. The finer the concrete, the better the contours. I recommend <4mm…
Simple model to produce planters or utensils holder Made to be used with polimer plaster I use some 65 Mpa which is strong. Currently no real images because I'm printing it. But it will work well. EDIT: I printed it and worked well, sadly…
two-in-one casting mold can be used for candles, the material must be ABS, with the proviso that we pour wax into the mold, then tap the candle out and put a wick into the resulting hole, or we can pour plaster or concrete into the mold,…
Reusable-Chain-Casting-Mold The chain fits onto the 4248957 wheel. I printed everything from PLA. I tried it with silicone and it worked well. How to do: Stick the two parts of the outer ring with adhesive tape together. Slide this ring…
These are models to make sand molds for metal casting. Printed at 100% the beltbuckles are ideal for 40 mm wide belts, at 75% you can use 30 mm belts instead. When making the mold first place the "base" on a flat surface and make the…
This project shows how to create geometric cardboard vases using a reusable 3D printed mold. The mold consists of two mirrored halves that form a clean hexagonal shape with faceted sides. Instead of printing a full vase, the mold allows…
Nero's Burning Ashtray - Casting Mold A casting mold of a customized Nero bust that can also be used as an actual ashtray. Technical Features: Easy Assembly: The mold is designed to be clamped together using M4 screws . Alignment Guides:…
A modular molding box to create a number of shapes and forms you need. I printed a bunch of them in all sizes so I van modify my molds. Created for casting silicone but can be used with other materials too. The sides and corners interlock…
The Simple Twister model is designed for effective fishing of predatory fish such as pike and zander. Its elongated, graceful body, devoid of active elements, imitates natural prey moving through the water.
This is a printed form that I used to make a mold from epoxy-bonded sand to cast an inca-inspired mace head. Casting is incredibly dangerous. I am not responsible for any use made of these models.
This model would help to create silicon molds for soups or candles, you just need to print 2 pieces and clamp theme together place them in a flat surface like a glass, apply silcon or clay in the border to prevent spilling and inside you…
My son got a melting furnace. To support his first attempts at metal sand casting, I constructed a two-part frame. The frame is connected with printed bolts.
The bigger one is 1 kg,and the smaller one is 0.5kg. I put two small (2.9mm)holes in the bottom of each model so when you need to take is out on the casting sand/clay you can screw in two m3 screws or some woodscrews for puling “handles”.…
use to cast tires for a 1/10 rc car use a long m4 bolt to hold it together, after first joining the 3 parts with m4bolts
You're a spy/locksmith/red teamer with only seconds of access to a key, this is the tool you need to make a near perfect reproduction and gain access to the controlled areas that key opens. This model includes two designs for molds that…
This casting system as two main components, a: Pouring Basin (reusable) Mold Blank (for customization) The resin used is a high heat tolerance resin specifically designed for metal casting called ThermaCast by Monocure3D. You CAN NOT use…
If you like this project please do press the like button above. It really helps me out. Thank you. 😊 How to 3D Print and/or Laser cut an ESP32 WiFi connected Weather Forecasting Theatre with E-ink Display. Meet WeatherBot, my WiFi…
This is my non professional approach to extend 3D printing for myself to create metal objects using the "lost PLA" method. I try to write up the way which worked for me, including the objects I used for printing. This is not intended for…
Meeples from expansions for the board game "Casting shadows" by unstable games Both base and shadow forms (ice storm expansion base forms coming soon!) Feel free to comment requests for corrections/tweaks and I'll try to get to them. The…
this is a flask to put your wax tree in and pour the plaster, its reusable and way cheaper than buying it for 40 bucks. this design is made for fitting one ring (if placed right it can fit more) but if you need a bigger one just scale it…
This model was printed in PLA with a layer height of 0.2 mm, a 0.4 mm nozzle, 40% infill, no supports, and no brim. My "Mold Box" model stands out from others currently available online because it allows for the creation of a double mold…
this is a flask to put your wax tree in and pour the plaster, its reusable and way cheaper than buying it for 40 bucks. this design is made for fitting one ring (if placed right it can fit more) but if you need a bigger one just scale it…
Step 1 - Print the 2 mold halves Step 2 - Print the Mold Plug (spiky model) in ABS, acetone vapor smooth and allow to degas Step 3 - Use a tiny dab of superglue to hold the casting alignment standoff to the base of the spiky penis. There…
A drip tray solution for pottery slip casting, designed to repurpose the Avitus Trading LLC Medium Mixing Tub (Model #206124, Store SKU #1001098727) from Home Depot. This setup features custom-designed clips that securely attach to the…
This is a remix of the low poly pikachu to be able to cast it from metal using sandmolds. The procedure should be fairly straight forward if you are at least a little experienced with casting using handmade sand molds. I'll try to explain…
Print, Assemble with some filament bits, then tape off the seams (there will still be flash to trim on the inner seams) , add some silicone and you're in business! I added some dense non flammable fiber to my silicone to assist with…
My TPU-printed rubber feet are a very nice design to quickly create cheap feet for various devices. However sometimes you want the feet to be even softer than possible with TPU. So silicone casting comes in handy: Print this mold to cast…
This casting system as two main components, a: Pouring Basin (reusable) D20 Shell Mold (sacrificial chip off) The resin used is a high heat tolerance resin specifically designed for metal casting called ThermaCast by Monocure3D. You CAN…
These are probably sturdy enough to print and wear for a while just as plastic rings. I was asked to design a printable signet ring to be used for casting metal in Delft clay or sand. Here are ten sizes from 8 through 12.5 (US Sizes). The…
I am sand casting a set of jewelers hammer heads. These are the models (bucks) that will be used to make the sand molds for casting. There are six hammers in the set. I have also included a mold for a buck to be inserted where the handle…
In normal circumstances this wouldn't make any sense. Concrete isn't an ideal material to use for making your own weights: even though it's pretty heavy, it's not as dense as the materials that weights are usually made of (iron or steel),…
A 5 part casting mold for making monstera leaf patterned pots. Printing: Print one of each stl. If using a bedslinger (Prusa mk3, mini, etc.), rotate the wall parts so that the bed movement is along the longer axis of the wall piece to…
Quick new design for casting a silicone mold mainly used for resin buttons. I use a hot glue gun to seal the edges off.
This mold features 9 different geometric shapes including a heart, star, triangle, circle, and more. It can be used as an educational toy for kids, or as a casting mold for silicone, soap, wax, or even chocolate. ✅ No supports needed ✅…
This is a reusable 3D printable mold designed for casting 250g fishing sinkers from concrete. Ideal for anglers looking for an eco-friendly and cost-effective alternative to lead sinkers. The mold is easy to print and use, and it can be…
Nozzle shape for casting Ender-style hotend nozzles. Has a placeholder throat and no threading, meant to be added during post-processing.
Created a negative casting mold of the “Fantasy Dildo” model. This mold allows you to cast a model of the original dildo. I cast directly into the mold using platinum silicone and it turned out really well. No release or coating agents…
Loving my Maker Lamps, I decided to make a cast concrete base. Giving them a good heft and making them less likely to topple over when tugging on the cord or manipulating with other items in a near vicinity, as well as nice contrast of…
General: A low cost, adjustable, customizable, high powered vibrating table for high quality bubble free epoxy/silicone pours and molds. Why I designed this: I made this for eliminating bubbles while doing silicone injection molding using…
This is a 3D-printed casting funnel designed to assist in working with liquid clay slip. It is used to pour the slip cleanly and efficiently into pre-made plaster molds. The design ensures controlled filling, reduces spillage, and makes…
This is a customizable constellation pendant that you can shine light through and project on a wall. It also includes lines showing which stars are connected in a constelation. This was my first attempt at scad, so customization requires…
This actually ended up really useful, if grass seed wasn't so expensive I'd be using it all the time because it really works well! Long story short, I needed to spread some grass seed so I designed and 3D printed one (well mostly printed,…
Larger Mold Box for casting more buttons like N64 or Gamecube Controllers.
I remixed the original model because I couldn't hang my casting reels. It's now compatible with them, but it doesn't support spinning reels (which have a larger foot). I wanted to hang them from the holes for the bookcase shelves, so I…
Rod rest ideal for surfcasting, with three hole for M6 inserts. Compatible with the major bankstick in commerce. For better results use gyroid with 40% infill and PETG filament. No supports needed.
The Prime Radiant from AppleTV's Foundation Series. The Prime Radiant: An Archimedean solid, cuboctahedran made of six square faces and eight equilateral triangles. The internal lattice is created by projecting the edges inward toward the…
In dice-casting or art resin casting activities I was looking for a simple and cheap, disposable tray solution to catch resin oozes and simplify transfers from the mixing station over to the pressure pots. With a small mountain of…
Yet another resin calibration object, hopefully we don't need these some day. -Designed specifically for jewellers to slot stones of 6mm, 5mm, 4mm, 3mm, 2mm, 1.5mm, and 1mm and test exactly how accurate a resin print will be in reality.…
Key Features Two Versions: Includes a standard Low-Poly Model for decorative printing and an Ultra Low-Poly Model specifically designed for casting purposes. Casting Optimization: The Ultra Low-Poly model has a special focus on geometry,…
Mould version of the "Silver Stand" to mould using concrete or white casting powder
I made this print because I couldn't find a sand rammer that perfectly matched my needs. This one is designed to fit on a Prusa printer, and be easily castable in sand. All sides have a slight slope, even the bottom, to make casting as…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Green sand ramming molds for a pour basin and riser vent for sand casting.
Designed for making custom ice cube trays, could also be used for general casting. Tape everything together before casting to prevent leaks. Volume is 50x50x40mm for normal wall height Source files and an ‘example’ base provided.
Two-Part Silicone Mold Box for a Sparrow Figurine This model is a functional mold box designed specifically for creating a two-part silicone mold of a 3D-printed sparrow figurine. The geometry includes alignment holes, pouring channels,…
To be able to measure the radiation dose given to mice and rats in a radiotherapy research department we used the Digimouse data to create a casting mold to make silicon mice and rats (after scaling). Small details as the feet are hard to…
Beautiful woman sculpture I included a super base ... if you change filament at the correct layer, it can look awesome.... This model is maybe 200mm high with a 16.2mm hole in the base, so it will fit nicely on any 16mm peg or free stand…
These are tabletop figurines inspired by the vinyls of casting shadows. I love the game and their artstyle and was curious if it was possible to create something resembling it. Created with the help of AI and polished for better printing…
This is a small mold for a ceramic cup that I designed and fabricated. The mold is made from plaster, which allows you to cast ceramic slip inside to create the final cup. A crucial step in the process is preparing the 3D-printed master…
Hello everybody this is my mold for silicone to make resin boomarks. Just mix silicone my favorite is the blue one. Pour in the mold wait few hours and remove it. And you can use them to make pretty resin or other material bookmarks Specs…
Cast real metal dice safely at home using just hot water ! This project uses a 3D printed PETG mold to cast ultra-low melting point alloys (melting point < 80°C / 176°F) without needing a furnace or open flame. Unlike traditional casting,…
This is a 2-part 3D printable mold designed to create objects using silicone, resin, wax, or similar casting materials. The mold features a clean internal cavity with fine details to achieve a realistic The two-piece design allows for…
Supports Unfortunately, since this model has an internal dome shape, it requires supports. i recommend using painted ones to make sure you only support needed areas and to ensure a good surface finish. Materials 80a rubber resin and…
Introduction 🛠 I created simple but practical molds for casting digits 0–9. You can use them as decorations, labels, or cast your own birthday candles from wax. The model is designed to print well and be usable with various materials.…
01/03/2026 Update: I modified the mold at the base of the floor drain (trainer recess). When I first created this vessel sink, I machined this part by hand (which was quite a delicate process, I must say). I took the measurements based on…
Designed it as a wedding gift. It is designed to pour concrete into it, but it should work with other casting materials as well, as long as they are not too low viscosity. The finer the concrete, the better the contours. I recommend <4mm…
With these moulds you can cast the 4 Elemental Stones: representing fire, water, earth and air. Fifth Element is not included. To form the Light of Creation and save the Earth, provide a Supreme Being of your choice 😊 The moulds can be…
Simple model to produce planters or utensils holder Made to be used with polimer plaster I use some 65 Mpa which is strong. Currently no real images because I'm printing it. But it will work well. EDIT: I printed it and worked well, sadly…
two-in-one casting mold can be used for candles, the material must be ABS, with the proviso that we pour wax into the mold, then tap the candle out and put a wick into the resulting hole, or we can pour plaster or concrete into the mold,…
Reusable-Chain-Casting-Mold The chain fits onto the 4248957 wheel. I printed everything from PLA. I tried it with silicone and it worked well. How to do: Stick the two parts of the outer ring with adhesive tape together. Slide this ring…
A casting mold for your DIY egg cups, to give your eggs the comfort they deserve.
These are models to make sand molds for metal casting. Printed at 100% the beltbuckles are ideal for 40 mm wide belts, at 75% you can use 30 mm belts instead. When making the mold first place the "base" on a flat surface and make the…
This project shows how to create geometric cardboard vases using a reusable 3D printed mold. The mold consists of two mirrored halves that form a clean hexagonal shape with faceted sides. Instead of printing a full vase, the mold allows…
Nero's Burning Ashtray - Casting Mold A casting mold of a customized Nero bust that can also be used as an actual ashtray. Technical Features: Easy Assembly: The mold is designed to be clamped together using M4 screws . Alignment Guides:…
A modular molding box to create a number of shapes and forms you need. I printed a bunch of them in all sizes so I van modify my molds. Created for casting silicone but can be used with other materials too. The sides and corners interlock…
A unique 3D printable creation — this Tea Light Candle Mold Master, Standard Size, Silicone Casting, Multi-Cavity Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File - Print…
The Simple Twister model is designed for effective fishing of predatory fish such as pike and zander. Its elongated, graceful body, devoid of active elements, imitates natural prey moving through the water.
This is a printed form that I used to make a mold from epoxy-bonded sand to cast an inca-inspired mace head. Casting is incredibly dangerous. I am not responsible for any use made of these models.
Inspired by Aguilar Workshop's model , but completely remodeled in Fusion. This Version of the mold is easy to print without supports and has pins and rails to easier lock. I used a clamp to lock it while it cures, but any vise will do
This model would help to create silicon molds for soups or candles, you just need to print 2 pieces and clamp theme together place them in a flat surface like a glass, apply silcon or clay in the border to prevent spilling and inside you…
This is a re-make of willie42's Casting Ring, but with an alignment notch so that I don't have to pay attention to the alignment of the two halves. There's also a chamfer for perfect centering for the eventuality that the clearance is too…
Cale destinée à éviter le glissement dans la boite pour le jeu de base Casting shadows.
Overview This project offers an alternative to expensive solid metal spacers. By using a 3D-printed shell as a permanent or removable mold for Epoxy Granite (Resin Marble) , you can create a component with high mass and excellent thermal…
