1 / 3
Sovol SV08 Max 150mm ZZ Tophat - IKEA Förnuftig air purifier addon — image 1
1 / 3

Sovol SV08 Max 150mm ZZ Tophat - IKEA Förnuftig air purifier addon

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Sovol SV08 Max 150mm ZZ Tophat corner with an air slot and connector to move the air to a IKEA Förnuftig air purifier.

Rating
0 / 5
Likes
3
Downloads
20
Makes
0
Views
315
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

This is an addon to the Sovol SV08 Max 150mm ZZ Tophat 


This replaces a corner with an air slot and connector to move the air to a IKEA Förnuftig air purifier.

You need a separate "IKEA Förnuftig" air purifier that you can get from IKEA, I sugest you also get the extra carbon filter for it as it was not included, at least not in stores in Sweden. The IKEA Förnuftig will be placed "face down" as is on top of the print and will move air from the printer via it's filter and out on the top.

NOTE: There are two versions include, on with the air channel on the back and one with the air channel on the side it you want to have the printer closer to the back wall (and have removed the fans there)
This also include a lid if you want to disable/remove the air purifier temporary. The IKEA Förnuftig adaptor has a place to store the lid inside it so you always know where it is.

e.g. You need to select Side OR Back version files and will end up with 3 files to print

  • 1 x Part IKEA Förnuftig Adaptor Airflow Side OR Back

  • 1 x Part TopHat Back Left Mod Side OR Back Airflow connection

  • 1 x Part Airflow Lid (optional, should worh on both Side or Back version)

A great care was made to be able to print without much support, so hopefully "Automatic support" would be good to go, at least maybe with my setting below.

I print this with Ocra slicer using:

Quality

  • Wall generator

    • Wall generator - Arachne 

Support tab

  • Enabling support,

    •  "Tree (auto)" 

    •  Threshold angle: 20 dgr

    •  Remove small overhang

  • Advanced

    • Top Z distace 0.34  (for more easy removal, you might want to test/tune this)

    • Bottom distace 0.34  (for more easy removal, you might want to test/tune this)

With this I printed the 4 big corners as then normaly stand and Ocra only adds support for the first few mm to the first edge and some support for the glas holder slider cut ins.

Notable other setting is that in Quality tab I use Bridge flow rate:  1.75 and my filement setting has 100% fan on "Overhangs and external bridges fan speed" this is to make overhang/bridges more nice, not sure if it strictly needed for this print.

Warning: This is a large print and made to be printed on the SV08 Max itself to keep number of pieces down.  E.g. some part probably need an print area of about 360x360 and even lager for the IKEA Förnuftig addond e.g 470x360

Link to CAD files:
https://cad.onshape.com/documents/017be025acd33fb5c4a610f1/w/99d8c6f61eba4f77f98a66d0/e/680cb076dd87bd3e6a5822c2?renderMode=0&uiState=69622db234b872f316faa131

Version history:
V22 2026-01-24 First version 
V29 2026-03-02 Add 0.3mm space around top glass

Tags