Cable Hero - The Ultimate Print-in-Place Cable Reel
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Say goodbye to tangled wires and messy desks. The Cable Hero is here to save your cable management game!
- Rating
- 4.529 / 5
- Likes
- 688
- Downloads
- 2,373
- Makes
- 14
- Views
- 8,781
- Reviews
- 17
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Cable Hero - The Ultimate Print-in-Place Cable Reel ⚡
Say goodbye to tangled wires and messy desks. The Cable Hero is here to save your cable management game! This is a fully Print-in-Place design, meaning the rotating mechanism prints fully assembled. No screws, no glue, and no snapping parts together—just print and wind.
Designed specifically for USB-C cables, this reel comes in three sizes and five distinct textures to match your style.
📏 Sizing Guide:
Choose the right size based on your cable length and thickness.
Size | Dimension | Capacity / Cable Fit |
Small | 68 x 25 mm | Best for 3-4mm thick cables up to 1m length. |
Medium | 75 x 28 mm | Fits standard USB-C cables up to 1.5m length. |
Large | 81 x 30 mm | Fits long cables up to 1.7m. Accommodates USB-C and smaller USB connector heads. |
🎨 5 Styles Available
I have included five different finishes so you can choose the grip and look that suits you best:
Waves: A flowing, organic texture.
Hex: A technical, geometric honeycomb look.
Knurled: High-grip texture, perfect for easy winding.
Ripples: A concentric water-drop effect.
Blank: Smooth and clean minimalist look.
⚙ How to Use
Insert: Push one end of your cable all the way through the center hole of the reel until the connector sticks out the other side.
Center: Position the reel roughly in the middle of the cable (or wherever you prefer).
Wind: Hold the outer ring and rotate the inner mechanism to wind the cable inside until you reach your desired length.
🖨 Print Settings
Supports: ⛔ NO SUPPORTS
Material: PLA, PETG, or ABS.
Infill: 15% - 20% usually works great.
Walls/Perimeters: 3 walls recommended for strength.
Brim: Use brim if you experince adhesion issues with outer ring
Clearance: This is a Print-in-Place design with tight tolerances. Ensure your printer is calibrated. If the mechanism is stiff right off the bed, give it a firm twist to "break" the internal adhesion, and it will spin freely.
Happy Printing! If you like the Cable Hero, please leave a like and post a picture of your make!