1 / 3
Creality K2 Pro – Top Glass Cover Stopper / Holder — image 1
1 / 3

Creality K2 Pro – Top Glass Cover Stopper / Holder

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Zarážka horního skleněného krytu pro Creality K2 Pro

Rating
0 / 5
Likes
7
Downloads
48
Makes
0
Views
226
Reviews
0

Updated at source:

Model information

License
Creative Commons — Public Domain

Praktická zarážka určená pro otevřený horní skleněný kryt tiskárny Creality K2 Pro. Díky přesným tolerancím stačí díl nasunout na sklo a zarážka drží sama – bez lepení či šroubů.

Vlastnosti

  • 🔒 Těsný horní zářez
    Vrchní část má přesně dimenzovaný zářez, který se těsně nasune na hranu skla a drží čistě přítlakem.

  • 🧩 Přesné spodní osazení
    Spodní část má profilované dosednutí, které pevně zapadne na hranu krytu a stabilizuje celou zarážku při otevření víka.

  • 🎨 Možnost vícebarevného tisku
    Zapuštěné logo lze zvýraznit pomocí CFS / změny barvy, nebo tisknout celý díl jednobarevně.

Tisková orientace a podpěry

  • Varianta s logem (logo směrem dolů):

    • Je potřeba podpěra pouze pod spodním osazením.

    • Ostatní části se tisknou bez podpěr.

  • Jednobarevný tisk (model postavený na boku):

    • Bez podpěr.

    • Nejrychlejší varianta a ideální pro čistý tisk.

Doporučená tisková nastavení

  • Materiál: PLA

  • Výška vrstvy: 0,2 mm

  • Výplň: 15–20 %

  • Perimetry: 3

  • Podpěry: dle orientace (viz výše)

Použití

Zarážku jednoduše nasuňte na horní skleněný kryt.
Horní zářez se pevně uchytí na skle a spodní osazení přesně dosedne na hranu víka. Získáte tak stabilní aretaci otevřeného krytu při kontrole nebo manipulaci u tisku.

A simple and practical stopper designed for the top glass cover of the Creality K2 Pro.
The part slides directly onto the glass and holds firmly thanks to accurately tuned tolerances — no glue, screws, or hardware needed.

Features

  • 🔒 Tight upper slot
    The top section includes a precisely dimensioned tight slot that slides onto the glass and holds by natural tension.

  • 🧩 Accurate bottom alignment step
    The bottom side is shaped with a dedicated step that fits perfectly onto the edge of the cover, ensuring proper positioning and stability when the lid is open.

  • 🎨 Optional multi-color logo
    The recessed logo can be printed in a second color (CFS / color change), or simply printed in one color.

Print Orientation & Supports

  • Logo printed facing down:

    • Requires supports only under the bottom alignment step.

    • No other supports needed.

  • Single-color print (model standing on its side):

    • No supports required.

    • Cleanest and fastest printing option.

Recommended Print Settings

  • Material: PLA

  • Layer height: 0.2 mm

  • Infill: 15–20%

  • Perimeters: 3

  • Supports: only when printing logo-down (see above)

Usage

Slide the stopper onto the top glass cover.
The tight upper slot grips the glass securely, while the bottom alignment step locks perfectly onto the lid edge. This provides a stable and reliable position for the open cover when checking or working on the printer.

Tags