Moisture apsorber cases for fillament storage
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Moisture cases for storing filament and drying after wards For Creality Space PI dryer .
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 5
- Makes
- 0
- Views
- 73
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Public Domain
Round PLA cases for silicon moisture absorber orange one , with elastic bands sawn betwine cases .
lower case should be made with 100% infill top covers can be made with 15% , 100 % is because when you try to put it on a spool you squeeze sides and there is some times a lot of force on bars , earlier design have broken with thinner bars .
M3 screw length of 50 mm screw is needed and two M3 nuts . use elastic band with width around 30 mm if you use wider it becomes a lot more difficult to place it around the spool.
There are also a 3 storage containers for drying silica when it becomes black , general time is around 6 hours , on ABS setting , the storage containers need to be from ABS because of temperature of 65 degrees. It was design to be used with Creality Space PI filament dryer . There is also a tool for pouring silica back in containers . Just place it over a drying containers and flip up side down .