1 / 2
MK1/2/2.5 Miata/Mx5 suspension bushing mould — image 1
1 / 2

MK1/2/2.5 Miata/Mx5 suspension bushing mould

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Simple two part mould for casting bushings. Will require 2 printed moulds to cast one bushing.

Rating
0 / 5
Likes
1
Downloads
17
Makes
0
Views
83
Reviews
0

Updated at source:

Model information

Category
Automotive
License
Creative Commons — Attribution

Wanted Polybush my mk1, but bush kit is extremley expensive, so went down the route of printing moulds and casting myself.

Designed based of existing polybushes(borrowed of my friend and took dimensions).

Printed in TPU95A, I would advise experiment with settings. I used 0.4 nozzle, automatic settings in Cura, but changed infill of 15% gyroid on N3Pro.

To cast, I used 2 part castable polyutherene, Shore D65 is what seemed appropriate and seemed about same as the ones online(no information on websited what hardness bushings they sell), no science - just pressing with fingers like a stake, will also need sort of release agent(wax based spray worked for me), some sort of makeshift shaker plate would be beneficial when casting, to get rid of bubbles and and centre pin would need to be made.


People are welcome to test, adopt, change design, there will be no updates as Ive no longer own the car.

If anyone has printed and casted, please send some updates in long run.

Tags