Z_calibration Ender 3 Pro
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A remix of two different setups for implementing auto z calibration on the Ender 3 Pro. Pictures on the way.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 13
- Makes
- 0
- Views
- 123
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I remixed the brush holder to be able to hold 2x regular sized A1 bambu silicone brushes.
And adapted kevinakasams “diy sexbolt” using the original z endstop and a plunger to fit onto oldcrazyeyes “Bolt On Z” setup.
See CAD model for mounting the parts. You might have to move you Y extrusion 20 mm forwards.
I replaced the switch on the original z endstop with an Omron D2F for better repeatability, and i used a steel pin 6.3mm diameter and 23mm long. It was what i had lying around.
You probably have to modify the cad to fit whatever plunger you can find for the “sexbolt”
I did not have any heat set inserts, so everything is adapted to fit M3 bolts that are screwed directly into the plastic. So far it is very solid.
The sizes should make sense as you go.
See Kevinakasams discord for more info.
https://discord.gg/8Esj6hRsNp
Using protolofts auto z calibration: https://github.com/protoloft/klipper_z_calibration
And oldcrazyeyes macros and adaptation to using the klackender probe: https://github.com/oldcrazyeye/Auto-Z-Ender-3