TAF | Tough Ass Frame V3.1 | 3.5inch fpv freestyle frame
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Frame designed to be 3d printed but be super durable
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 49
- Makes
- 0
- Views
- 261
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
TAF - Tough Ass Frame
Author rights of this model for the company " RS Vision s. r. o. " are directed by me (Lukas Vitek) personaly.
V4.0 RELEASE
You know what? F*CK THE WEIGHT!!!
This it just pure strength, also super easy to print now.
V3.1 RELEASE
The model of thae frame was adjusted to be easy to print on a traditional fdm printer since i lost the ability to have the frame printed on mjf.
V3.0 RELEASE
The weight of the frame was reduced dramaticaly finaly reaching carbon frame weight at around 75g* .
*if printed with nylon cf
V2.5 RELEASE
The frame had some flaws, and in the proces of fixing them, the model became so complicated, onshape litteraly refuses to draw out / render some faces. They are there, onshape is just K.Od by this.........
The frame was significantly improved on looks and strength
More space for the vtx to fit older hdzero race vtx
DJI support added
Dual antena videosystem support added (hole size fixed in v2.6)
Minor flaw and ease of use improvements
The TAF is a 3D-printed frame built for anyone who wants a "tank" for both racing but mainly freestyle.
The goal was to create something that doesn't just snap during the first hard crash.
Because of the geometry and the material's ability to flex, it handles impacts better than most carbon frames that would normally delaminate or shatter.
It’s a hobby project designed in onshape by me only to be thrashed, crashed, and easily reprinted if you somehow manage to break it.
Author rights of this model for the company " RS Vision s. r. o. " are directed by me (Lukas Vitek) personaly.
You can watch the frame being edited live here: (download from here for prerelease frame prototypes)
https://cad.onshape.com/documents/4f2200a8e31e83c71e1e637a/w/6ec27944166e54c6e234a95b/e/01d3b33952fdef87b4539699?renderMode=0&uiState=69825b2f3a68894e9df21e05
Specs:
12mm mounting holes for motors
20mm m3 for vtx
25mm for stack/aio
standard 16mm for cam
up to 3.6inch props
Print Settings:
Material: Idealy Petg-cf but print with what you want
Infill: 100% but any realy, your choice
Supports: Everywhere

