1 / 1
Peak Design plate v3 Honeycomb Storage Wall (Lens Holder) — image 1

Peak Design plate v3 Honeycomb Storage Wall (Lens Holder)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Attach your Peak Design V3 to Honeycomb Storage Wall

Rating
0 / 5
Likes
2
Downloads
6
Makes
0
Views
158
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

I printed the Peak Design part out of ABS, 4 walls, 15% gyroid infill, 0.2 mm layer height. MK4S w/ HF 0.4mm nozzle. You need to use PrusaSlicer's paint-on support tool to support the actuating arm part, as below. I recommend using organic supports for ease of removal, you won't break the arm then.


You need to print two M3 Honeycomb storage wall nut inserts (see files), I printed these out of PLA, 4 walls.

Tags