1 / 1
Peak Design plate v3 Honeycomb Storage Wall (Lens Holder) — zdjęcie 1

Peak Design plate v3 Honeycomb Storage Wall (Lens Holder)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Attach your Peak Design V3 to Honeycomb Storage Wall

Ocena
0 / 5
Polubienia
2
Pobrania
6
Wydruki
0
Wyświetlenia
158
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Attribution — Noncommercial

I printed the Peak Design part out of ABS, 4 walls, 15% gyroid infill, 0.2 mm layer height. MK4S w/ HF 0.4mm nozzle. You need to use PrusaSlicer's paint-on support tool to support the actuating arm part, as below. I recommend using organic supports for ease of removal, you won't break the arm then.


You need to print two M3 Honeycomb storage wall nut inserts (see files), I printed these out of PLA, 4 walls.

Tagi