1 / 5
Rans Wing Spar seal/cover S-7, S-20 and likely others.
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Covers the annular pace between the fuselage tubing and the wing spar tube.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 5
- Makes
- 0
- Views
- 33
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial
An embarrassingly simple and niche model :-) Covers up the hole between the fuselage tube and the wing spar where mine was showing insulation. Clips easily over the tube and slides in place against the spar. Best in PETG.
You only need 2 - Some of my files have 6 because I gave a bunch away.
Probably work on the S-6 too but tested on the 7 and 20. ID=33mm, OD=77mm, 3mm thick.
