1 / 5
Rans Wing Spar seal/cover S-7, S-20 and likely others.
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Covers the annular pace between the fuselage tubing and the wing spar tube.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 33
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial
An embarrassingly simple and niche model :-) Covers up the hole between the fuselage tube and the wing spar where mine was showing insulation. Clips easily over the tube and slides in place against the spar. Best in PETG.
You only need 2 - Some of my files have 6 because I gave a bunch away.
Probably work on the S-6 too but tested on the 7 and 20. ID=33mm, OD=77mm, 3mm thick.
