Bike AirTag Holder for Bottle-Cage-Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Two-part AirTag holder for hidden bike mounting via bottle cage screws; AirTag clamped inside, splash-resistant.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 86
- Makes
- 0
- Views
- 340
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
Technical details
Mounting position: between bike frame and bottle cage
Fasteners required:
2× M5 × 30 mm screws
Compatibility:
Standard bicycle bottle cage mounts (M5 threads, dimensions can be found on the uploaded picture)
Apple AirTag
Design:
Two-piece, screw-mounted
Protection:
Splash-resistant
Not fully waterproof (important to state clearly)
Print recommendations
Recommended materials:
PETG (recommended)
ASA (better for long-term outdoor use)
PLA only with limitations (heat + UV)
Print settings (guidelines):
Layer height: 0.2 mm
Infill: 20–30 %
Orientation:
Flat side on the print bed
Durability note:
PLA may deform in high temperatures (summer sun). Its highly recommended to use more resistant Materials like ASA or PETG.
Assembly instructions (more details on the uploaded pictures)
Place the AirTag into one half
Put the second half on top
Position the holder between frame and bottle cage
Fix with 2× M5×30 mm screws (you can also try to use the original screws of you bike, but they may be too short)
Tighten carefully (plastic part)