MG Gouf Custom leg booster unit
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Leg booster inspired by High Mobility Zaku designs.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 53
- Makes
- 0
- Views
- 283
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Action Figures & Statues
- License
- Creative Commons — Attribution
This is an additional booster for the MG Gouf Custom similar to the one on a High Mobility Zaku.
To fit the part, you must cut the leg armor to an exact size & shape, so it's a risky change :)
Tips
To mount the booster, fill the cavity with epoxy putty leaving a few mm protruding and press onto the the inner frame.
Due to the curvature of the armor and the sloped sides of the booster, the angle of the cut is hard to judge. Leave extra waste and trim the edge slowly with a sanding block or wide file, held at the angle of the booster wall.
If you take too much off, patch the edge with a strip of styrene.
Mark every piece as Left-Leg and Right-Leg, because there will be slight differences in the mounting and the cuts.