1 / 1
AirTag Holder for Bikes - Under the Saddle — image 1

AirTag Holder for Bikes - Under the Saddle

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Discrete Apple AirTag holder for bicycles

Rating
0 / 5
Likes
0
Downloads
23
Makes
0
Views
216
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

A discrete, simple, AirTag mount for bikes - or could also be used as a deterrent or decoy!

Designed to mount under the saddle on the rails - at a standard distance of 50.5mm outside and 36.5mm inside. Two M5 screws are required, as well as two nuts to fit into the slots on the model.

For more security - M5 security screws could be used, as well as a little bit of glue, tape or similar.  Printed by myself at 0.2mm layer height, with supports, black PETG as pictured. I don't recommend PLA - but ABS, ASA or similarly UV-resistant filaments would work. 

AirTag model used available at [https://www.printables.com/model/255519-hi-res-apple-airtag-model-for-fusion-360-and-more] @Gustav_24630

Tags