AirTag Holder for Bikes - Under the Saddle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Discrete Apple AirTag holder for bicycles
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 216
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A discrete, simple, AirTag mount for bikes - or could also be used as a deterrent or decoy!
Designed to mount under the saddle on the rails - at a standard distance of 50.5mm outside and 36.5mm inside. Two M5 screws are required, as well as two nuts to fit into the slots on the model.
For more security - M5 security screws could be used, as well as a little bit of glue, tape or similar. Printed by myself at 0.2mm layer height, with supports, black PETG as pictured. I don't recommend PLA - but ABS, ASA or similarly UV-resistant filaments would work.
AirTag model used available at [https://www.printables.com/model/255519-hi-res-apple-airtag-model-for-fusion-360-and-more] @Gustav_24630