Liczymy pasujące modele…
From left to right on 2nd image; 1: Round Top 2: Flat Top 3-5: O-Ring Sealing, Plus Cutaways, SAE AS 010 and Metric 2x6mm O-Ring Sized Versions 6: TPU Printable O-Ring Insert for SAE and Metric Sized Caps (Insert so 45 degree angle faces…
I was trying to fix up an old bike of mine and was trying to figure out the BCD (Bolt Circle Diameter) of my cranks. I came across a helpful resource, Sheldon Brown's 5-Bolt Chain Wheel Guide, and I was able to find the right BCD for my…
We kept finding the wires of our E-bike chargers kept getting trodden on when they were on the floor! So we have made this smart device to hold the plugs up away from being stood on. To fix them to the wall, you will need two 3"x8…
The plastic base of my stool has completely disappeared into the chair leg. So here is a base that I designed using Tinkercad. I actually made it for a different chair. It works for all chairs or tables that have a round tube as a leg. In…
v4 of the Ryden Bikes measuring tool was remixed to fit a meter stick - ruler easily obtainable at Amazon US: https://www.amazon.com/dp/B00KQ6AENG The meter stick is 5.5mm x 28.5mm thick. The BB piece was resized to fit snuggly. The…
BMX Rear Tire Lever use this to make replacing your rear wheel a breeze. I got tired of stacking tire levers, and made this- it pushes your tire back against the chain and keeps it straight while you tighten the rear axle bolts/nuts. I…
Two of them combined with an 10mm aluminium tube make for a strengthening bar on the Christiania (or or similar bikes) cargo bicycle cover. Tye-wraps can be used to position the connectors. With a slighter longer bar the torsion force is…
This is a headlight mount for Rad Power Bikes that allows you to mount the headlight to your handlebars, if for some reason you would need that. I used the MIKE config tool and printed in Nylon. I did a test in PLA+ and that works…
A discrete, simple, AirTag mount for bikes - or could also be used as a deterrent or decoy! Designed to mount onto existing screws for drink bottle holders (at a standard distance of 64mm, and a screw size of M5). The screws hold both…
A discrete, simple, AirTag mount for bikes - or could also be used as a deterrent or decoy! Designed to mount under the saddle on the rails - at a standard distance of 50.5mm outside and 36.5mm inside. Two M5 screws are required, as well…
This is an alternative trigger shifter lever for a Frog 48 bike. It seems the trigger is a Shimano Alivio. Installation: Remove old lever. I used a knife. Attach the new lever to the metal lever through the hole with a cable tie.…
BH Bikes iLynx Trail B-Plug Cover (TPU/TPE/Flex) Ersatz für verlorenes Cover zum Schutz der Ladebuchse vor Nässe und Dreck. … vorzugsweise mit weichem TPU (habe 85A verwendet), sitzt eng, ist aber auch gut zu entfernen für's laden.
It will have to be scaled in the slicer as i didn't design it to scale, simple to print i printed on 15% infill and its structurally solid and difficult to break.
U lock and cable holder for Intersport VTC Nakamura e-bikes
Hi, Attached is the 3D model for an adapter for bikes that have a basket in the front, and the handle cannot be used to attach the light. Diameter where lamp is attached is 32mm Diameter where it goes attached t the bike is 24mm
I installed HDB handguards on my 2019 690, and it caused interference between the front brake lines and where my speedo was mounted on the Lynx fairing dash. The first part is a bracket (print x2) that bolts onto the HDB handguard bar…
Very basic box meant to contain wires on Razor MX/SX frame. It doesn't include holes in the box since I figured drilling would be easier than finding my mounting solution first and then measuring. I ended up mounting with Zip ties. Does…
This is a side cover grommet for the 2003 - 2017 Honda CRF 150 & 230 dirtbikes. I made this for my 2005 CRF 230 and it looks like my 2006 CRF 150 uses the same grommet for the side covers. This may fit other motorcycles that use the Honda…
This Pannier Adapter allows you to retrofit aftermarket panniers onto the Rad Power Bikes (shown above). 🌟🌟🌟Read full description🌟🌟🌟 If you own panniers that use the modern style clips or the older style of metal hangers & bungee hooks,…
The thing that this thing is based off is so flimsy! I accidentally dropped my e-bike and it broke off. So I started to look for replacement parts. I know this thing can be found easily on Alliexpress on the cheap but my problem is it…
This is a remix of https://www.thingiverse.com/thing:2597055 I like my brompton, but sometimes I'm lazy, so I want to use my e-bike. This is a way to attach an awesome Brompton bag to a regular bicycle. (the spacings between the holes is…
I have designed a knurled valve cap , as shown in the image. This valve cap features a universal design and complies with the international standard ISO 9413 , ensuring compatibility with common Schrader valves . After rigorous testing,…
Dělal jsem takový malý projekt se snem vyrobit si vlastní mtb kolo. Díly byly zremixovány tak, aby společně tvořily celou mtb kola. Ne vše je vytisknuté. protože jsem více kutil velkou část jsem vytvořil z krabicového kartonu, párátek,…
Here is my own Gopro mount for my old Honda CB1000R (but it works for other action cams with the same attachment): Allows the opening of the tank cap during refueling Perfect point of view of the road, instruments included Doesn't…
Convert an older Scicon Aerocomfort 2.0 bag for use with thru-axle bikes. Specifically, these pieces are used to upgrade the quick-release-only frame of this bike bag into one that fits 100x12mm and 142x12mm thru-axle bikes. Full details…
Printed on A1 in PETG, but I don't see why you couldn't use PLA No supports needed I printed with a brim, outer only to avoid getting anything stuck in the teeth
Traffic Signs - No access for: Escooter Ebikes Campervan Tracked Vehicles Printable with single extruder (No fancy stuff, No AMS needed) Size: 160x160mm | Height 3.2mm Print: Layer height: 0.2mm (for 0.4mm nozzles) Perimeters: 2 Infill:…
Display unit with tactile switch for OpenBikeSensor OpenBikeSensor is an open source, open data and citizen science project. See https://www.openbikesensor.org/ (only in German language available). You can find a translation of the…
Bike wall mount, upgraded a bit after one of mine broke.
A screwable holder for the display unit of an OpenBikeSensor OpenBikeSensor is an open source, open data and citizen science project. See https://www.openbikesensor.org/ (only in German language available). You can find a translation of…
Wallmount for Battery Charger of E-Bikes from Focus Jam2 / Jam2 HT / Bold2 / Sam2 with Shimano E8000 motor, using a 378wh internal or 378wh T.E.C. Pack Battery. Mountable with two screws to a wall or, using the holes on the backside with…
Wallmount for E-Bike 378wh T.E.C Pack Battery of E-Bikes from Focus Jam2 / Jam2 HT / Bold2 / Sam2 with Shimano E8000 motor. Mountable with two screws to a wall or, using the holes on the backside with 2 screws (Phillips Rounded Head…
Mud flap that I made for my Voltbike Mariner and that I now use on my Lectric Xpremium. Will fit on any 4 x 20 fat tires, and probably on any 4 inch fat tires bikes, but you could need to ajust the length for your needs (you could use one…
Wall mount for Ampler's 3A Li-ion charger with Rosenberger plug, modified from an existing model to include screw holes. The charger was shipped with the bike Juna / Axel. Note: The charger this mount was designed for has a slight…
You will need 2 M5x40 screws 2 self-locking nuts M5 optionally 4 M3 x 15 or M3 x 16 screws 4 M3 nuts The M3 screws are used to prevent delamination of the layers. You can omit them for lightweight bags. FreeCad files included to modify…
Chain Guard Replacement for Cube Bikes (21-15953) See print orientation on image.
# Parts List: Print Strong - 4+ walls; decent infill (I used PETG) - 2 @ PhoneRemount_Arm.stl - 2 @ PhoneRemount_Clamp.stl - 1 @ PhoneRemount_Bar.stl ## Optional Print using TPU PhoneRemount_Spacer.stl ## Hardware: - 4 @ M4 Socket head…
You can attach this holder with a screw and a Galaxy Tag 2 in it on your bike or like you can see in my pictures on an e-scooter, but also on anything else and you will be able to know everytime where your device is located.
Rad Power Bikes front rack is usually out of stock, so I made this wee substitute for it. The rack transports a twelve-pack of one´s favorite beverages or an equivalent amount of whatnot. It also has a built-in slot as an extra feature to…
Holder for Garmin and sensors cadence and speed. Holders for spinning bikes. Created by dzino:)
m8x50mm for the 2 piece version or 6mm alen key up to 42cm bars before wall touch
A screwable seat post mount for the OpenBikeSensor OpenBikeSensor is an open source, open data and citizen science project. See https://www.openbikesensor.org/ (only in German language available). You can find a translation of the…
Airtag holder. Tips: Print in PETG or ASA or an equivalently UV and heat resistant material. Print with 2 walls and 10% infill. This is to prevent signal blockage. Print in a color that matches your bike. Print the 2 halves with screw…
The plastic base of my stool has completely disappeared into the chair leg. So here is a base that I designed using Tinkercad. I actually made it for a different chair. It works for all chairs or tables that have a round tube as a leg. In…
The Unicorn Bikes BashBox is a great bit of additional storage for your enduro bike. This model was designed for 32T chainrings. Frame shape will greatly impact compatibility. I designed it for the ActoFive P-Train CNC, but it should fit…
These spoke clickers add sound and style to your ride, designed to fit children’s and standard bicycle spokes (1.8–2.3 mm). Available in two diameters (2.2 mm and 2.5 mm) and four designs — heart, 6-sided die, star, and ring — they snap…
v4 of the Ryden Bikes measuring tool was remixed to fit a meter stick - ruler easily obtainable at Amazon US: https://www.amazon.com/dp/B00KQ6AENG The meter stick is 5.5mm x 28.5mm thick. The BB piece was resized to fit snuggly. The…
This is a tool tray for the feedback sports bike stand. It is 100% printable, no need for threaded inserts It holds at least 1,5kg (With Prusament PETG and the print settings I used) I tested that with a 1.5L Water bottle. I don't know…
A durable, universal bike handle mount designed to fit all standard handlebars. Reinforced to support the weight of e-bikes, cargo bikes, or even dirt bikes (if mounted upside down). It’s easy to print: only requires support between the…
BMX Rear Tire Lever use this to make replacing your rear wheel a breeze. I got tired of stacking tire levers, and made this- it pushes your tire back against the chain and keeps it straight while you tighten the rear axle bolts/nuts. I…
Need a way to express yourself? Having trouble getting to 37 pieces of flair? Add this kick stand foot for extra flair! The diameter of the hole is approx 25mm. The slit in side of shaft/hole and printing in TPU helps give some…
Two of them combined with an 10mm aluminium tube make for a strengthening bar on the Christiania (or or similar bikes) cargo bicycle cover. Tye-wraps can be used to position the connectors. With a slighter longer bar the torsion force is…
Generally This is a simple cargo rack for a non full suspension bike of any kind that can hold up to 10kg of weight. It has been designed with printed parts, D16.5mm and D13mm steel rods. Ive provided all Step-files of this model so that…
Here are a few different license plates from the 80's made for your bike. Simply slide the bracket around your seat pole on your bike and lock it in place with the holder and slip the custom made license plate on the holder to turn your…
This is a 78mm measuring gauge for motorbike mirrors used in GERMANY. The law in Germany says that all motorbike mirrors may have a minimum surface of 69cm². This is easy to measure if it is a ROUND mirror because it means that your round…
Update 2025-09-15: Added a shield to the top spacer to prevent the wire going into the handlebar through the stem from getting tangled on the screw. Uploaded as a new step file v2. Designed a custom spacer kit to install onto a Canyon…
I needed a way to hook bikes and other things to the wall in my garage to save space. Made this guy and seemed to work well. Will hold light bikes off the ground. Would not recommend holding adult sized bikes, instead hook the handlebars…
Stop dirt and debris filling your Presta valve — this ultra-light TPU aero cap is designed for road, mountain & gravel bikes. Lightweight and aerodynamic valve cover for bicycles, designed to protect your entire Presta valve from dirt and…
Simple syringe holder that holds the syringe on the bike frame or fork during brake bleeding. This keeps your hands free for other tasks. The syringe is hold into place by a rubber band and another one is used to attach the holder to the…
A Wallmount fot the battery charger for the Lekker Bikes Amsterdam.
I made this for a RC motorcycle I am working on. You might need to cut/sand some parts if they do not fit.
I wanted to create a mount for a moto-tag (airtag) that wasn't in the frame as the metal of the frame can block signal strength. I also didn't want to place it in the obvious under the seat places as well. I decided to place it on the…
This is a headlight mount for Rad Power Bikes that allows you to mount the headlight to your handlebars, if for some reason you would need that. I used the MIKE config tool and printed in Nylon. I did a test in PLA+ and that works…
Needed is 4 threaded brass inserts for m4 2 m4 x 20mm 2 m4 x 25mm
This is a replacement chainring guard for the Islabikes Beinn 24 I created for my child's bike. It will fit other sizes of the Beinn (except the Beinn 29). Screws thread directly in to the holes. Based on this product:…
Ever lost the tool for mounting your valve extensions? Print this! Print it with a very high infill as it strengthens the structure! (printed mine with 0.95 infill; 0.15 layer; ABS, 243/100°C)…
A discrete, simple, AirTag mount for bikes - or could also be used as a deterrent or decoy! Designed to mount onto existing screws for drink bottle holders (at a standard distance of 64mm, and a screw size of M5). The screws hold both…
A discrete, simple, AirTag mount for bikes - or could also be used as a deterrent or decoy! Designed to mount under the saddle on the rails - at a standard distance of 50.5mm outside and 36.5mm inside. Two M5 screws are required, as well…
This is my first fairly complicated build, which I devloped it half a year ago and used it since then. It works really well and is very easy to use. You need: the printed parts 4 M4 screws and nuts(>35mm, depending on your powerbank) 2 M4…
I modeled this for my 2019 Pivot Mach 4SL. It looks like it's the same shape as the current bikes but I haven't checked. There's some variation in how these fit on my bike due to frame inconsistencies. This has enough tolerance to fit all…
Display Stand for LEGO Star Wars 7128 Speeder Bikes
Twinny Load Easy is a nice quickloading bikerack for cars. However with racing/gravel bikes the slope in the top bar makes your front wheel hang too low and it hits the ground (speedbumps). This extender corrects that. It slides in the…
Die Halterung kann mit oder ohne Griff gedruckt werden (beide Varianten als Download verfürbar). Wichtig: Zur Sicherheit immer beide Kabelbinder verwenden - falls das Gehäuse beim Herausnehmen mal brechen sollte. Den 2. Kabelbinder immer…
This is an alternative trigger shifter lever for a Frog 48 bike. It seems the trigger is a Shimano Alivio. Installation: Remove old lever. I used a knife. Attach the new lever to the metal lever through the hole with a cable tie.…
Fuel petcock on my XR650R was allowing fuel to come out even when it was off. Took it apart and found the gasket with four holes in it was chewed up. Printed this on a textured sheet in 92A TPU with the following settings and it doesn't…
Fits on mesh seats on HP Velotechnik bikes Extra needed are two standard bike waterbottle holders, nuts and bolds.
A friend of ours, with quite a few very long solo bikepacking trips under her belt, mentioned that she is using a stand which also works with loaded bikes. I checked it out and at first I did not believe that something so simple could…
Paired with a quick quick release pin these make for an easy way to transport kids bikes or any bike with smaller wheels easily. Used with 4" long 5/16" quick release pin (~$2.40 on mcmaster part #98320A280) -…
spend Few Days making printing and modifying my own Diamond shape garmin mount for specialzed bikes,seems to be pretty strong,feel free to modify it. only needed you add this mount on your bike is a sram shifter clamp bolt (match maker)…
Friend handed me a broken and half melted printed mount for a baja light on his e-bike. Rebuilt it in cad to hold up to stress and printed in in petg instead of a 15%infil pla. added heated inserts so youll need at least : 4 m5 heated…
### [EN] English Description A rugged, direct replacement handle for Ortlieb pannier bags, specifically designed for models bundled with Moustache Bikes (utilizing the QL3.1 mounting system). (See the photo for the final rendered look in…
es una tapa para el llavín de la bicicleta, ideal si se le pierde la llave y así no le quede el agujero abierto xD ojo en caso de que quiera otro repuesto o quiera modificar el archivo me puede escribir y por algún precio podemos realizar…
Keep the mud off your back without ruining the look of your bike. I designed this custom rear mudguard specifically for the Orbea Terra , but it will very likely fit many other gravel and cyclocross bikes with a similar frame geometry.…
HDB makes a handlebar mount for the Husqvarna 701 / KTM 690 that this fits. I clip my mini molle bag onto this on longer trips for cell phone charging, wallet, glasses case or whatever you need fast access to. Suits the pictured bags from…
Remix of the end plugs by Stamos that fits drop handle bars. Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: No Supports: No Resolution: 0.12 Infill: 20% Filament: BasicFil PETG black Notes: Turn on bridging and…
I made this for my Year 2000 DRZ-400S. On the left is a switch for the USB power and LED driving lights. Then there are two USB plugs (you can buy that device on eBay). Then a space for a tach/hour meter. Then a phono plug for a heated…
Printed in PLA or ABS, mount on you Bike using M4 Screws Paste Reflector tape as you wish ;)
This mounting plate results in a very robust mount for the DJI RC remote control, such as those offered for the DJI Mini 3 Pro drone. The mount is tailored to the remote control and intended for outdoor use, especially on bicycles. Note:…
This a keychain i designed. The STL needs to be scaled down 50%. I created it a bit larger. Print Settings Printer Brand: TEVO Printer: Tornado Rafts: No Supports: No Resolution: 0.2 Infill: 10 Filament: Leapfrog PLA Orange Notes: Scale…
This is the longer version of the previous Skid plate for the Rad Rhino Powerbike. On request i created this version to cover the whole bottom cable assembly. You can Choose either one Print Settings Printer Brand: TEVO Printer: Tornado…
Holder for a GoPro hero 3 I made when I was 14. Meant to be clamped with the handlebars where it is attached to the stem. Printed on ender 3 using the cura v4.11 CHEP profiles.
Bike Box: This is a rugged box for a Bike that can hold a few tools and a tire repair kit. Print each file once. (You can but you dont have to print the Klammer) I used: 0.6mm Nozzle (0.4mm is also good) 0.3mm Layerheight (0.2mm is also…
I designed this for the 2A charger for my Juiced Hyper Scorpion. It should work for others I believe that have similar designs. The charger needs to fit within the 73mm x 36mm dimensions. It has a couple of hooks for cable management.…
Ryden Bikes Smart Measurement and setup tool UPDATED Jan 2025 Updated links + New iOS app available Oct 2023 with new V6 version. This tool is useful for serious cyclists that have had a professional bike fit, or that have multiple bikes…
