Bench Power Supply SFX conversion
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a Bench Power supply enclosure for an SFX form factor computer power supply conversion.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 58
- Makes
- 0
- Views
- 508
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
This is a Bench Power supply enclosure for an SFX form factor computer power supply conversion. It could be used as a project box also.
I designed it to be screwed together with common computer screws, 2.8mm pilot and 3.5mm clearance. Everything fits well and shouldn't need any cleanup, except the holes. I made a solid layer at the holes to make it more printer friendly.
Have fun with it, let me know how it goes if you make one. :)
Print instructions
Category: Electronics Print Settings
Printer: Anet A8
Supports: Doesn't Matter
Resolution: 0.25mm
Infill: 10%
Notes:
It may print okay without supports. I printed with supports.
There is only one side model, mirror in your slicer for the opposite side.
I printed with three top and bottom layers and one perimeter, Two or three would be better quality with more filament used. Mine turned out fine with one perimeter though.
My bed is 220 x 220. The front and rear face plates used the whole bed. I rotated them 45 degrees for the print.