Power Supply Mount (Meanwell RT-65B)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The Meanwell RT-65B power supply is popular with eurorack enthusiasts. https://www.meanwell.com/productPdf.aspx?i=484…
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 96
- Makes
- 0
- Views
- 818
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
The Meanwell RT-65B power supply is popular with eurorack enthusiasts.
https://www.meanwell.com/productPdf.aspx?i=484
The PSU is difficult to mount to a DIY enclosure, so I designed this mount. The PSU mounts to the 3d print, and the print can be screwed/bolted to whatever you are using.
Five M3 x 0.5 x 5mm screws/washers are used to attach the PSU to the mount.
I've tested this design with the RT-65B but it probably works unmodified with other PSUs in the Meanwell product line.
The design is parameteric - and I've included the source if you wish to modify it.
Note: This is not OpenSCAD. It's a program written in Go. The main library and code examples can be found here:
https://github.com/deadsy/sdfx
About Go: https://golang.org/
Print Settings
Printer Brand:
SeeMeCNC
Printer:
Rostock MAX v2
Rafts:
No
Supports:
No
Resolution:
200
Infill:
20
Filament: Your Choice PLA
Category: Electronics