Outdoor lamp
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Outdoor lamp to be fitted with GU10 LED lamp
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 14
- Makes
- 0
- Views
- 105
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial
I guess most materials except PLA is fine to use, I made mine in brass colored ABS. Lamp "glass" made from some kind of transparent/clear filament. I made mine in PETG (since I already had that one in house but it might be better with a more weatherproof filament).
2 versions: Glass diameter 105mm or 140mm
Wall mount: Organic supports everywhere and for strength: Add a cylindrical modifier for the rod between wall and lamp to make 100% infill, alternatively use 100% infill or 5-6 perimeters over all. My lamps still haven't been tested in a real storm/hurricane...
No particular print instructions for other parts.
Need a GU10 socket and two about 15cm M4 stainless steel threaded rods and two M4 nuts.
Add a modifier (neative volume) in the slicer for cable entry if needed.
It may be wise to add a bit of glue to the threads between wall mount and top lid. If printed in ABS/ASA, a few drops of acetone on the threads will do fine.
This is still a work in progress so modifications will be posted every now and then...
28.02.26: Added 140mm top lid for M4 hot inserts (https://www.prusa3d.com/product/heat-set-inserts-m4-standard-50-pcs/) and edited wall mount instructions.
02.03.26: Added space for 7mm socket in bottom lid and marker for alignment in 140mm top lid for M4 inserts.