Outdoor lamp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
I guess most materials except PLA is fine to use, I made mine in brass colored ABS. Lamp "glass" made from some kind of transparent/clear filament. I made mine in PETG (since I already had that one in house but it might be better with a more weatherproof filament).
2 versions: Glass diameter 105mm or 140mm
Wall mount: Organic supports everywhere and for strength: Add a cylindrical modifier for the rod between wall and lamp to make 100% infill, alternatively use 100% infill or 5-6 perimeters over all. My lamps still haven't been tested in a real storm/hurricane...
No particular print instructions for other parts.
Need a GU10 socket and two about 15cm M4 stainless steel threaded rods and two M4 nuts.
Add a modifier (neative volume) in the slicer for cable entry if needed.
It may be wise to add a bit of glue to the threads between wall mount and top lid. If printed in ABS/ASA, a few drops of acetone on the threads will do fine.
This is still a work in progress so modifications will be posted every now and then...
28.02.26: Added 140mm top lid for M4 hot inserts (https://www.prusa3d.com/product/heat-set-inserts-m4-standard-50-pcs/) and edited wall mount instructions.
02.03.26: Added space for 7mm socket in bottom lid and marker for alignment in 140mm top lid for M4 inserts.