Zebra Technologies SmartLens(tm) SNAP Install Guide (Type 1)
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.19 – €0.23 net (excluding VAT)
For file: SNAP Inst Guide Sight (Basic) v2 (OPT PETG 50,322 S).gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.21 excluding VAT (range midpoint).
- Weight reported by the author
- 2 g
- Print time reported by the author
- 15 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
The SNAP Install Guide is used to aid in the proper installation and alignment of the SmartLens SNAP units.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 9
- Makes
- 0
- Views
- 181
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
SmartLens SNAP Install Guide (Type 1) - Used to aid in the installation and alignment of the SmartLens SNAP units for proper real-time locationing in retail environments.. Please refer to the SmartLens Installation Documents pertaining to its proper function and use.
For more information on Zebra Technologies SmartLens solution for retail: https://www.zebra.com/us/en/solutions/intelligent-edge-solutions/smartlens-for-retail.html
SNAP Install Guide:
- Supports: Set to 2mm
- Build time: 1 hour 12 minutes
- Filament length: 7499.6 mm
- Plastic weight: 22.55 g (0.05 lb)
- Material cost: 1.04
Guide Aiming Sight
- Supports: Set to 1mm - Alternatively you can set a brim to help the part adher to the print bed
- Build time: 0 hours 14 minutes
- Filament length: 608.6 mm
- Plastic weight: 1.83 g (0.00 lb)
- Material cost: 0.08