1 / 9
VW ID.Buzz no drill license plate fixture — image 1
1 / 9

VW ID.Buzz no drill license plate fixture

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This fixture clamps onto the front bumper of the VW ID.Buzz to provide a mounting point for a license plate bracket.

Rating
0 / 5
Likes
2
Downloads
28
Makes
0
Views
145
Reviews
0

Updated at source:

Model information

Category
Automotive
License
Creative Commons — Attribution — Noncommercial

This fixture clamps onto the front bumper of the VW ID.Buzz to provide a mounting point for a license plate bracket without drilling holes or otherwise damaging the front bumper.  I made this fixture to support a generic license plate bracket (e.g. https://www.amazon.com/dp/B0G2SX8BQ8).

The front bumper of the ID.Buzz features a unique design with holes of unique shapes and bevels.  This fixture consists of two parts that closely match the inside and outside dimensions of holes in the center just above the radar emitter.  The parts can be clamped together using 25-30mm M5 screws to sandwich the bumper between the two halves and secure a suitable license plate bracket.

I've also provided the SVGs and OpenSCAD file so that others can remix this into a full license plate bracket or to better match the contour to the bumper as the bumper of the ID.Buzz has a forward pitch where this fixture mounts and this fixture does not compensate for that pitch.

There is a foam shock absorber on the inside of the bumper so the interior profile of the model is cropped slightly to clear it.  The interior profile is also slightly smaller than the exterior to account for a bevel in the holes in the bumper.

Tags