VW ID.Buzz no drill license plate fixture
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This fixture clamps onto the front bumper of the VW ID.Buzz to provide a mounting point for a license plate bracket.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 145
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
This fixture clamps onto the front bumper of the VW ID.Buzz to provide a mounting point for a license plate bracket without drilling holes or otherwise damaging the front bumper. I made this fixture to support a generic license plate bracket (e.g. https://www.amazon.com/dp/B0G2SX8BQ8).
The front bumper of the ID.Buzz features a unique design with holes of unique shapes and bevels. This fixture consists of two parts that closely match the inside and outside dimensions of holes in the center just above the radar emitter. The parts can be clamped together using 25-30mm M5 screws to sandwich the bumper between the two halves and secure a suitable license plate bracket.
I've also provided the SVGs and OpenSCAD file so that others can remix this into a full license plate bracket or to better match the contour to the bumper as the bumper of the ID.Buzz has a forward pitch where this fixture mounts and this fixture does not compensate for that pitch.
There is a foam shock absorber on the inside of the bumper so the interior profile of the model is cropped slightly to clear it. The interior profile is also slightly smaller than the exterior to account for a bevel in the holes in the bumper.