1 / 5
Gantry mounted nozzle wiper for CoreOne
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Gantry mounted nozzle wiper for the CoreOne. Remixed to fit A1 style silicone brush
- Rating
- 3.5 / 5
- Likes
- 10
- Downloads
- 24
- Makes
- 2
- Views
- 391
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I've adjusted some overhang angles on the original model for easier printing, as I was having trouble getting clean prints using Polylite PETG.
Also adjusted the wiper holder width and depth to fit A1 style silicone brushes. NOTE cut the brush to <= 14mm long to fit (see pic).
Printed using Polylite PETG, 0.4mm nozzle, 0.2mm layer height. Automatic organic supports (see pic).