One-piece minimalist tape roller
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
One-piece minimalist tape roller (for easy to tear tapes only)
- Rating
- 5 / 5
- Likes
- 8
- Downloads
- 18
- Makes
- 1
- Views
- 61
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial
My daughter uses a lot of decorative tape in all kinds of colors and patterns, so I wanted to print her some extra tape rollers.
It does NOT work with regular clear TESA tape (their red and blue tape roller in the picture has a steel cutter for a reason -> their tape is just too strong ;-) ).
Printed on a resin printer, the cutter is sharp enough for cheap decorative tapes and probably also for thin paper based tapes, which are comparably easy to tear (probably also works with the 3M micropor tape).
For tape with 19mm width, 21mm spool inner diameter and up to 39mm outer diameter.
This is likely a RESIN PRINTER ONLY design (I doubt you'll get the edges sharp enough on a FDM printer for the cutter to work).
After the first six now came out great from the orientation test, I still plan to slightly update the model soon (0,5mm bigger spool holder diameter, slightly more pointy cutter). All shown orientations resulted in a clean and sharp cutter area.