Minimalist Skadis Ribbed Planter with Detachable Drip Tray
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
elevate you skadis decor with this minimalist planter
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 35
- Makes
- 0
- Views
- 147
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution
Elevate your IKEA Skadis setup with these sleek, minimalist planters. Designed specifically for small succulents, cacti, or propagation cuttings, these planters feature a clean ribbed texture that blends perfectly with modern office or home decor.
Key Features:
Integrated Skadis Mount: No extra hooks needed. The mounting bracket is built directly into the planter for a flush, secure fit.
Two-Piece Design: Includes a main planter body with drainage holes and a twist-lock/snap-on bottom tray to catch excess water.
Seamless Aesthetic: The tray matches the planter's diameter perfectly, making the drainage system almost invisible.
Optimized for 3D Printing: Designed to print cleanly without the need for complex supports (check your orientation).
Recommended Print Settings:
Material: PLA (for indoor use) or PETG (if it will be in direct sunlight).
Layer Height: 0.16mm - 0.2mm for a smooth finish on the ribs.
Walls: 3 walls for water-tightness.
Infill: 15% (Grid or Gyroid).
Supports: Minimal supports might be needed only for the mounting hook, depending on your printer's bridging capabilities.