Minimalist Skadis Ribbed Planter with Detachable Drip Tray
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
elevate you skadis decor with this minimalist planter
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 144
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution
Elevate your IKEA Skadis setup with these sleek, minimalist planters. Designed specifically for small succulents, cacti, or propagation cuttings, these planters feature a clean ribbed texture that blends perfectly with modern office or home decor.
Key Features:
Integrated Skadis Mount: No extra hooks needed. The mounting bracket is built directly into the planter for a flush, secure fit.
Two-Piece Design: Includes a main planter body with drainage holes and a twist-lock/snap-on bottom tray to catch excess water.
Seamless Aesthetic: The tray matches the planter's diameter perfectly, making the drainage system almost invisible.
Optimized for 3D Printing: Designed to print cleanly without the need for complex supports (check your orientation).
Recommended Print Settings:
Material: PLA (for indoor use) or PETG (if it will be in direct sunlight).
Layer Height: 0.16mm - 0.2mm for a smooth finish on the ribs.
Walls: 3 walls for water-tightness.
Infill: 15% (Grid or Gyroid).
Supports: Minimal supports might be needed only for the mounting hook, depending on your printer's bridging capabilities.