Oil Filter Draining Tool
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple oil filter drain tool that hangs on the edge of a 5 gallon bucket.
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 37
- Makes
- 0
- Views
- 148
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is a simple oil filter drain tool designed for general aviation filters which are 3 3/4 inches in diameter It hangs over the side of a 5 gallon bucket allowing you to drain the filter before cutting open for inspection. I printed with PLA which is suitable only for cool oil. But I plan to experiment with other materials.
Minimal supports are required for the hooks.
I printed the black one with Sunlu PLA+ 2.0. 0.4mm nozzle, 0.2mm speed, 15% infill.
The Yellow one is printed with Amazon basics PETG, this seemed to require more supports to print correctly. I have added a new generic PETG profile to the files.
Update 2/12/2026: Changed the PETG file to have organic supports. This seemed to work better.