Wall mount for IKEA Klippbok sensor, with the option of attaching a cord to extend the sensor.
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
With this wall bracket you can connect other switches without having to do anything special to the unit itself.
- Rating
- 5 / 5
- Likes
- 4
- Downloads
- 51
- Makes
- 1
- Views
- 301
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Wall-mounted
- License
- Creative Commons — Attribution — Share Alike
Using this holder with "Klippbok" like the holder for "Badring" increases user-friendliness considerably.
This water sensor should actually lie on the floor, with the sensors in the floor to detect water.
Now with this wall bracket you can connect other "switches" without having to do anything special to the unit itself.
Connect two conductors, use as long a wire as desired and strip the sheathing on the wires to the same length as the fabric is long. Mount the copper wires in the fabric. I used a fabric that absorbs water very well. Make a strip of fabric as long as needed with these two conductors attached but they should NOT touch each other. When the leak is a fact, the fabric absorbs the water and Klippbok signals that there is water on the floor. This increases monitoring of the area if you compare the two contacts on the Klippbok itself.
Printed without support.
Happy printing !