10 Inch Rack 4u Oculink 5 drive JBOD with ATX PSU
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Made a 10 Inch Rack 4u Oculink 5 drive JBOD with ATX PSU to plug into my HP Mini PC server.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 7
- Makes
- 0
- Views
- 528
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution
I can find and upload the fusion 360 design file if anybody wants it, leave a comment. It's way larger than it needs to be, but I wanted to use stuff I had laying around, so a full size ATX power supply went in instead of getting a more sensible size sata only power supply.
Printed on Creality K1 Max in 5 pieces out of Creality ABS with 15% honeycomb infill and then super-glued together.
Infill type probably doesn't matter, I just thought it would look cool should it leave a slight pattern on the top layers. Maybe could increase the infill density, but it seems fine so far.
When I printed it, I made sure that the outside visible portions were the side touching the textured bed plate.
The hole in the front is designed to fit this 5bay HDD cage:
In the photos I also show this ssd adapter:
Used this Oculink board: https://a.co/d/5ikBJOY
And this sata card: https://a.co/d/4lzxtG8
I am currently having issues using that sata card passed through to a proxmox vm, but it might just be a secure boot issue. It works fine in proxmox itself as vm storage.
