1 / 7
Ständer zum Präsentieren von Bildern auf Malplatten / Stand for presenting pictures on painting plates — image 1
1 / 7

Ständer zum Präsentieren von Bildern auf Malplatten / Stand for presenting pictures on painting plates

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Ein Ständer auf dem man mehrere Malplatten durchblättern kann / A stand on which you can browse through several plates

Rating
0 / 5
Likes
1
Downloads
4
Makes
0
Views
38
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

deutsch:

13.3.2026: Kleinere Version hinzugefügt
8.8.2026: Stabilere Halter mit je 4 Schraublöchern

Dieser Ständer dient zum Präsentieren von Bildern auf Malplatten oder Fotos auf festem Karton. Man kann die Platten durchblättern. Es können insgesamt 9 Platten in die Halter gesteckt werden. Sie kommen normalerweise nicht miteinander in Berührung.

Der Ständer besteht aus zwei Leisten mit Löchern und 9 Haltern für die Malplatten. Die Leisten müssen auf einen festen Untergrund aufgeschraubt werden. Dazu eignet sich z.B. ein Holzbrett. Zur Montage hat sich bei mir bewährt, eine Leiste anzuschrauben und dann die Halter in die andere Leiste einzustecken. Diese Leiste mit den Haltern habe ich dann vorsichtig zur anderen Leiste geschoben und  nacheinander die Halter in die zweite Leiste eingesteckt und gleichzeitig die erste Leiste in Richtung der zweiten Leiste gedrückt. Anschließend habe ich die zweite Leiste festgeschraubt.

Die Leisten der ersten Version in PLA haben sich durch die Belastung mit großen Malplatten verbogen und die Halter sind dadurch aus den Löchern gerutscht. Deshalb habe ich jetzt Leisten mit 4 Schraublöchern hinzu gefügt (Malplattenkrippenständer_v2). Die PETG-Leisten haben sich bisher nicht verbogen.

Druck: Standard, PLA funktioniert, PETG ist stabiler.

Weiteres Material: 4 oder 8 Holzschrauben 3x20 mm

Mit der Openscad-Datei kann die Größe der Halter an die Malplatten angepasst werden. Zwei Größen können als stl-Dateien direkt herunter geladen werden: Für große Malplatten (ca. 40x40 cm) ist "Malplattenkrippenständer-100.stl" geeignet, für kleine Malplatten (10x10 cm) ist es "Malplattenkrippenständer-50.stl" (siehe Fotos).

english:

13.3.2025: Smaller version added
8.8.2026: More stable holders with 4 screw holes each

This stand is used to present pictures on painting plates or photos on fixed cardboard. You can browse through the plates. A total of 9 plates can be inserted into the holders. They usually do not come into contact with each other.

The stand consists of two bars with holes and 9 holders for the painting plates. The bars must be screwed onto a solid substrate. For example, a wooden board is suitable. For installation it has proven to me to screw on a bar and then insert the holders into the holes of the other bar. I then carefully pushed this bar with the holders to the other bar and inserted the holders into the holes in the secon bar one after the other and at the same time pressed the first bar towards the second bar. Then I bolted the second bar.

The strips of the first version in PLA have bent ourseween the load with large painting plates and the holders have slipped out of the holes. That is why I have added strips with 4 screw holes (Malplattenkrippenständer_v2). The PETG bars have not yet bent.

Print: Standard, PLA works, PETG is more durable.

Other material: 4 or 8 Woodscrews 3x20 mm

With the Openscad file, the size of the holders can be adjusted to the painting plates. Two sizes can be downloaded directly as stl files: for large painting plates (approx. 40x40 cm) is suitable "Malplattenkrippenständer-100.stl", for small painting plates (10x10 cm) it is "Malplattenkrippenständer-50.stl" (see photos).

Tags