sealing screws / TPU-feets
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Screws for sealing threaded holes (M8, M10, M12, M16) or as screw-in feet
- Rating
- 5 / 5
- Likes
- 7
- Downloads
- 7
- Makes
- 1
- Views
- 58
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Screws for sealing threaded holes, sizes M8, M10, M12, M16.
These screws seal threaded holes on the upper edge.
This protects them from dirt, paint or similar substances, e.g. when painting workpieces, and also protects unused threaded holes in a machine table from dirt.
I made my sealing screws from TPU 95a but you can also use PETG for example.
The sealing screws fit well into the threaded holes and the cone at the upper end presses well against the chamfer of the workpiece thread.
These screws protrude slightly above the edge of the hole, which opens up other possibilities for use, e.g. as screw-in feet, etc.